As can be seen from the above table, the ultra-fast recovery diode D92-02 does not have obvious advantages in current, voltage, reverse leakage current, and even recovery time compared to ordinary fast recovery diodes. Yes, although the above parameters determine whether a certain model can be used, in actual industrial applications, we have to consider more and more important parameters, even if their circuit design does not have a decisive influence - - Energy consumption, in applications that do not consider this situation, D92-02 and ordinary fast recovery diodes use little difference, but modern society, savings, links, more and more people pay attention to, in more enterprises In production, people pay more and more attention to this problem. This is a long-term sustainable development problem. In the circuit, the energy consumption of rectifier devices accounts for more than 80%. The reverse voltage drop of D92-02 is 0.94V, compared to the normal fast recovery voltage drop of 1.1V, its energy saving rate is more than 14%, which is a considerable figure, the advantage of D92-02 is exactly here.

Ultra-fast recovery diode D92-02 using Taiwan's Jianding integrated test equipment, reduce In the manual operation, 12 parameters such as Vb, Io, If, Vf and Ir were detected and detected by 6 channels. the leakage current is 5uA to be less than 2uA; the forward voltage drop Vf is tightened from 1.0V to 0.98V, that is, the single die VF is controlled within 0.49V;

Asemi Technology Co., Ltd. was established in 2008. It is a national high-tech enterprise integrating scientific research, development, manufacturing and sales. Independent brand ASEMI, specializing in rectifier bridges, diodes, power ICs, automotive diodes, rectifier modules, etc.