Why ASEMI-2W10 was chosen by AiEnge Electric?
Return ListSource：Asemi Date：2014.12.31 Read：0
After the cooperation with theASEMI in 2014, the household appliance expert Ai Enge Electric has a total order volume of 120k. Recently, Aigen Electric has purchased 2W10 of ASEMI brand in large quantities.
ASEMI and Ai Enge Electric - Trust comes from quality
At first, the head of Ai Eng Electric Beijing Company only visited the ASEMI Rectifier Bridge official website through the network, and expressed in the message section that it needs a large number of circular plug-in rectifier bridges, WOB package products. After seeing the message, ASEMI staff contacted her by email at the request of Miss Zhang at the first time. The timely service and professional attitude left a very good impression on the customer, Miss Zhang. Very satisfied with the ASEMI service, the communication between the two parties is very pleasant. After several rounds of discussions between the two sides, the cooperation agreement was finally finalized.
Considering the large mass production of popular general-purpose rectifier bridges, the price will be more favorable. Finally, we recommend the best-selling model 2W10 in the circular rectifier bridge. The ASEMI rectifier bridge 2W10 chip is large, the pin length is long and the circular design is more reasonable. It does not occupy space and has been highly praised by power supply manufacturers. Therefore, ASEMI products are also sold at home and abroad. In addition, Iron & Steel also ordered another popular model of the ASEMI brand, KBP310.
Five years have passed, and Iange Electric will often repurchase 2W10. What is special about this rectifier bridge?
ASEMI | bridge rectifier 2W10
ASEMI brand 2W10 - the special design of the appearance
First of all, the advantage of 2W10 in this design is that its heat dissipation area is better under the same volume, that is, the ratio of the heat dissipation area to its volume is large. This design can greatly improve the heat dissipation efficiency, and the rectifier bridge with the same parameters. In comparison, due to its small size, this package has higher heat dissipation performance.
2W10, its packaging method is WOB. This appearance is applied to a special design at the beginning of design. Due to the mutual influence of components and heat dissipation, the rectifier bridge body is too close to the PCB board, and its electrical properties. The heat dissipation effect is not good, so the lead is extended with lead wire, and the thick design is adopted. The lead wire is generally 3A rectifier bridge lead, which is the special aspect of the WOB package.
On the raw materials, ASEMI Rectifier Bridge 2W10 adopt the GPP gold-plated process chips of the advanced technology to ensure its stability and reliability. The internal frame and tin-plated pins are made of high-purity oxygen-free copper materials. The insulation of epoxy resin is the best among most of sealing materials, which can prevent the impact of high voltage and ensure the safety of the circuit.
ASEMI engineer | How to identify the quality
Quality pursuit: with 12 years ingenuity to create ASEMI
Taiwan ASEMI brand adheres to the belief of quality , adopts high-performance chips, and has 28 Jianding test lines in the factory. Each production department has engineers to guard and control, and strive to spare every detail.
This makes the ASEMI brand's 2W10 quality superior features, using glass-encapsulated GPP chip to ensure the stability of the product ; complete automation equipment supports injection molding, reducing the quality of manual injection molding products; Vb, Io, If, Vf and other 12 parameters passed 6 tests, improving the consistency of chip of 2W10; strict external inspection packaging procedures, rigorous staffs to make sure the accuracy of 2W10 package quantity.
Hotline
